DGA MACH DISC GOLF BASKETS

DGA invented the first formal Disc Golf target. Company founder, “Steady” Ed, formalized the sport of disc golf and started selling Pole Holes back in 1975. Since then, the Disc Pole Hole™ has become the standard for the sport of Disc Golf. The DGA Disc Pole Holes™ come in 3 models: the Mach II, Mach III and the Mach V.

Below you can compare the differences in the 3 models, but all share these same features:
* PDGA Approved
* hot-dipped galvanized head-to-toe providing the ultimate all-weather protection
* patented inner chains
* patented sliding link chain holder which helps high throws stick
* deep Trapper basket that prevents bounce-outs
* guaranteed for 20 years against failure due to rust and corrosion
* blue sparkle and orange glaze powder coating available ($50 additional per basket)

Each model is available in these three options:
* No Frills: Permanent and designed to be cemented directly into the ground. These baskets are not easily removable.
* Deluxe: Removable and designed to allow easy removal. An anchor is cemented directly into the ground and the pole fits into the anchor with a locking collar attached to the pole.
* Portable: Free standing and portable with its integrated industrial strength base wheel.

To order or get a quote, email: sales@discsunlimited.net. Or call: 785-258-2494 or 866-867-7815
The shopping cart does not figure the shipping correctly, therefore we prefer you just call or email. Thanks!

Model:	Mach New II™	Mach III™	Mach V™
Use:	Excellent disc golf basket for college campuses, summer camps, or for any course designed for recreational disc golf use as well as club and tournament play.	Most easily identified by the prominent number plate, considered the Cadillac® of disc catching equipment for the sport of disc golf.	Renowned for being the most advanced and innovative Disc Pole Hole available. The Mach V's patented staggered inner chain design creates three rows of chains that decelerate a disc as it hits each successive row. We Recommend this over the Mach III and it costs less!
Cost:	No Frills: 56 #, $257 Deluxe: 61#, $293 Portable: 69#, 293	No Frills: 62#, $384 Deluxe: 67#, $420 Portable: 70#, $420	No Frills: 58#, $322 Deluxe: 63#, $358 Portable: 66# $358
GET A QUOTE OR PLACE AN ORDER:	Please email: sales@discsunlimited.net or call: 785-258-2494 or 866-867-7815 to get multiple basket prices.
More Features Continued.....
Chain Assembly:	Mach New II™ 18 chains: with same spread pattern as Mach V... 12 outer sliding links and chains, 6 inner pipe protectors and chains. All 18 chains assembled with heavy duty "S" hooks to allow freer movement of chains. 6" Sleeve - Bolt: hex head nut and nylon insert locknut, hex head tec screw, internal tooth star lock washer, (will not vibrate loose like one-way screws). Rod Assembly - 3/8" steel rod.	Mach III™ 24 chains: 12 outer/12 inner chains, 500 lb. test, all hooked to Chain Assembly with heavy duty "S" Hooks to allow freer movement of Chains. Note that the Mach III's chain configuration is quite different from the Mach II and V.	Mach V™ 24 chains: The Mach V's patented staggered inner chain design creates three rows of chains that decelerate a disc as it hits each successive row. 12 outer sliding links and chains, 6 midway lifter hooks and chains, 6 inner pipe protectors and chains. All 24 chains assembled with heavy duty "S" hooks to allow freer movement of chains. 6" Sleeve - Bolt: hex head nut and nylon insert locknut, hex head tec screw, internal tooth star lock washer, (will not vibrate loose like one-way screws). Rod Assembly - 3/8" steel rod.
	Patented sliding chain holder mechanism slows the discs down, helps high throws stick, helps catch fast and powerful shots as well as slower finesse putts dropping them into the basket.
	Number plates are available as an upgrade for $25 each.	Comes with prominent 8" diameter Number Plate. 10 gauge steel attached to 6" sleeve made of 1-15/16" O.D. tubing with drilled hole. Bolt: hex head nut and nylon insert locknut, hex head tec screw, internal tooth star lock washer, (will not vibrate loose like one-way screws). Rod Assembly - 3/8" steel rod. Decal - vinyl numbers and identification cover.	Number plates are available as an upgrade for $25 each.
	Blue Sparkle and Orange Blaze powder coating are available on all baskets for an additional $50 per basket.
	The deep Trapper Basket™ prevents bounce-outs. It is made of 3/8" steel rod and welded to a 6" sleeve. Bolt: hex head nut and nylon insert locknut, hex head tec screw, internal tooth star lock washer, (will not vibrate loose like one-way screws).
	Flags are available as an upgrade.
Poles: 1-1/2" I.D. 1-15/16" O.D. hot-dipped galvanized tubing with drilled holes.	66 "	70 "	66 "
Locking Collar... for the Deluxe models	4" Collar: 2-1/8" tubing. Locking Tab: 3/16" steel with punched hole . Bolt: hex head nut and nylon insert locknut, hex head tec screw, internal tooth star lock washer (will not vibrate loose like one-way screws).
Anchor:	18" x 2-1/8" O.D. tubing with drilled hole. Installs flush to ground with matching Locking Tab aiming at the tee.

To order or get a quote, email: sales@discsunlimited.net. Or call: 785-258-2494 or 866-867-7815
The shopping cart does not figure the shipping correctly, therefore we prefer you just call or email. Thanks!

Return to DGA Baskets or see other Disc Golf Baskets.